8Kva - 2500Kva 4 Pole Brushless Ac Generator Drip Proof H
Global Power industrial generators meet the requirements of BS EN
60034 and the relevant section of other international standards
such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100,
Other standards and certifications can be considered on request.
Technical Specifications :
|Control System Ser.4||Separately Excited by P.M.G.|
|Control System Ser.4||Self Excited|
|A.V.R||Standard SX460||Optional AS440|
|Insulation System||Class H|
|Rated Power Factor||0.8|
|Stator Winding||Double Layer Concentric|
|Winding Pitch||Two Third|
|Stator Wdg. Resistance||0.065 Ohms Per Phase at 22°C Series Star Connected|
|Rotor Wdg. Resistance||0.83 Ohms at 22°C|
|Exciter Stator Resistance||20 Ohms at 22°C|
|Exciter Rotor Resistance||0.078 Ohms Per Phase AT 22°C|
|Maximum Overspeed||2250 Rev/Min|
|1 BEARING||2 BEARING|
|Weight Comp. Generator||337 kg||350 kg|
|Weight Wound Stator||120 kg||120 kg|
|Weight Wound Rotor||110.69 kg||110.69 kg|
|WR² Ineria||0.6071 kgm2||0.5754 kgm2|
|Shipping Weight in a crate||360 kg||371 kg|
|Packing Crate Size||105 x 57 x 96(cm)||105 x 57 x 96(cm)|
|50 Hz||60 Hz|
|Cooling Air||0.216 m³/sec 458 cfm||0.281 m³/sec 595 cfm|
|Voltage Series Star||380/220||400/231||415/240||440/254||416/240||440/254||460/266||480/277|
|kVA Base Rating for Reactance Values||72.5||72.5||72.5||70||83.8||87.5||87.5||93.8|
Our Features :
1) four-pole brushless self-excited, drip proof structure.
2) The stator, wound in 2/3 pitch, can effectively inhibit the
waveform distortion of the output voltage, and reduce the heat of
the magnetic field.
3) The rotor will reduce the voltage deviation and temperature rise
under non-constant load with the assistance of dynamic balance and
the impeccable damper before assembly.
4) The output power of the exciter rotor will supply the main rotor
through a three-phase full-wave bridge rectifier, which is
protected by a surge suppressor, in order to avoid damage from the
shock caused by the out-of-step phase on short circuit or in
5) Automatic Voltage Regulator has the characteristics to protect
he automatic load-shedding function of an engine. It will quickly
reduce the output voltage of a genset if the engine speed is lower
than the normal speed, which helps the engine or prime mover
recover rapidly in the sudden heavy load.
Windings & Electrical Performance:
All generator stators are wound to 2/3 pitch. This eliminates
triplen (3rd, 9th, 15th …) harmonics on the voltage waveform and is
found to be the optimum design for trouble-free supply of
The 2/3 pitch design avoids excessive neutral currents sometimes
seen with higher winding pitches, when in parallel withthe mains. A
fully connected damper winding reduces oscillations during
paralleling. This winding, with the 2/3pitch and carefully selected
pole and tooth designs, ensures very low waveform distortion.
Terminals & Termianl Box:
Standard generators are 3-phase reconnectable with 12ends brought
out to the terminals, which are mounted on a cover at the non-drive
end of the generator. A sheet steel terminal box contains the AVR
and provides ample space for the customers' wiring and gland
arrangements. It has removable panels for easy access.
1) Guarantee Period: One year or 1000 running hours whichever comes
2) During the guarantee period, the spare-parts will be sent
through your shipping agency in China.
3) Spare-parts can also be sent by air express.
4) 24 hours service hotline is available for customers.
Our Service :
1. If you are interested in our products we sincerely invite you to
take a visit of our factory when you are in China. We can drive to
pick you up and visit our factory.
2. Suggest the best choice or referential suggestion based on
customers’ information. Answer all questions about the product from
3. Build customers’ profiles, follow-up service, make regular calls